JOB OUTLINE:
To perform predictive, routine, preventive, and breakdown maintenance on production equipment to ensure smooth operation of&nbsp; the production facility. Be a key player within the production team and give his upmost to the management to reach departmental goals.

The General Soft Drinks


JOB OUTLINE:

To perform predictive, routine, preventive, and breakdown maintenance on production equipment to ensure smooth operation of
 the production facility. Be a key player within the production team and give his upmost to the management to reach departmental goals.

Responsibilities


 - To ensure timely and correct start-up of both Mineral Water Line and Soft Drinks Line.

 - To work as a team member and in close collaboration with the team leader

 - The technician is expected to work with the least supervision possible.

 - To plan and organize work with a methodical approach to keep the time of interventions as short as possible, whilst ensuring the maximum benefit of work in respect of yields and efficiency.

 - To work with the minimum supervision and show enough initiative and drive to complete works to the required standards. He must show diligence in his work by responding quickly to maintenance calls whilst liaising fully with the department concerned

 - To perform breakdown predictive, routine, and preventive maintenance on production lines and related equipment as requested by the Production Manager.

 - To sustain the department’s drive to meet and exceed the established level of service and goals. This shall be achieved by maintaining the machines/equipment under responsibility in an excellent working condition, thus limiting resulting downtime below the set limits

 - To ensure that all required information is logged/recorded and analyzed, and that relevant preventive action is taken to avoid/minimize downtime. To ensure that all forms are filled correctly and handed over within the days, week, or monthly time frame

 - To ensure the proper maintenance of workshop tools and individual tools and the state of cleanliness of his work area as well as the common workshop and its machines.

 - To conform to the plant’s quality culture, these include the observation of good documentation practices, good manufacturing practices and adhere to the Environment health and safety regulations. 

 - To give total support to colleagues through teamwork, the free exchange of information about his work activities and his disposition to meet the departmental and production exigencies which may require the working of overtime or shift hours. 

 -  To foster a “my plant” mentality and promote ownership of equipment and processes


Qualifications


 - Electrical License A and B (A minimum of License A).

 - Able to analyze problems and strategize for better solutions.

 - Able to multitask, prioritize and manage time efficiently.

 - Able to take own initiative to recommend improvements on equipment.

 - Able to work both alone as well as a team.

 - Strong technical background


Electrical License A and B (A minimum of License A).

Able to analyze problems and strategize for better solutions.

Able to multitask, prioritize and manage time efficiently.

Able to take own initiative to recommend improvements on equipment.

Able to work both alone as well as a team.

To ensure timely and correct start-up of both Mineral Water Line and Soft Drinks Line.

To work as a team member and in close collaboration with the team leader

The technician is expected to work with the least supervision possible.

To plan and organize work with a methodical approach to keep the time of interventions as short as possible, whilst ensuring the maximum benefit of work in respect of yields and efficiency.

To work with the minimum supervision and show enough initiative and drive to complete works to the required standards. He must show diligence in his work by responding quickly to maintenance calls whilst liaising fully with the department concerned

To perform breakdown predictive, routine, and preventive maintenance on production lines and related equipment as requested by the Production Manager.

To sustain the department’s drive to meet and exceed the established level of service and goals. This shall be achieved by maintaining the machines/equipment under responsibility in an excellent working condition, thus limiting resulting downtime below the set limits

To ensure that all required information is logged/recorded and analyzed, and that relevant preventive action is taken to avoid/minimize downtime. To ensure that all forms are filled correctly and handed over within the days, week, or monthly time frame

To ensure the proper maintenance of workshop tools and individual tools and the state of cleanliness of his work area as well as the common workshop and its machines.

To conform to the plant’s quality culture, these include the observation of good documentation practices, good manufacturing practices and adhere to the Environment health and safety regulations. 

To give total support to colleagues through teamwork, the free exchange of information about his work activities and his disposition to meet the departmental and production exigencies which may require the working of overtime or shift hours. 

 To foster a “my plant” mentality and promote ownership of equipment and processes

Ended

Production Technician

The VNA Driver is responsible to transfer and store pallets to and from VNA racking as directed by the Warehouse Supervisor and Checkers.


The VNA Driver is responsible to transfer and store pallets to and from VNA racking as directed by the Warehouse Supervisor and Checkers.

Responsibilities


 - To operate the VNA Trucks and Counterbalance Forklift Trucks in a safe manner, following the traffic management plan. 

 - To place pallets in their designated area.

 - To ensure that FEFO stock rotation is observed when retrieving pallets from VNA racking,

 - To ensure that all products are scanned while moving the same pallet from one zone to another. By scanning the VNA driver confirms the receipt/issue of goods as defined through the scanning process.

 - To fill in the daily equipment checklist before usage.

 - To report any damages/fault to the equipment.

 - To ensure that the equipment is always kept in a clean condition.

 - To charge batteries according to company procedure.

 - To wear personal protective equipment as per company policy.

 - To report any defect/damaged products observed in the warehouse.

 - To assist as necessary in warehousing related tasks including loading and unloading of trucks

 - VNA Drivers assigned to production duties need to refer to Technical Process Leaders (TPLs) during shifts when a Warehouse Coordinator is not present. It is also recommended that during ANY production shift, VNA Drivers liaise with TPLs in case they need to be excused for any reason.

 - To carry out other reasonable duties that are asked of you other those listed in this job description.

 - Stock rotation using FEFO.

 - To report any hazards in the warehouse racking.

 - To ensure that all pellet movements are scanned.


Qualifications


 - Secondary School Education.

 - Perform basic mathematical calculations.

 - Read &amp; Write English.

 - Driving License Category B.

 - Forklift Operation Course.

 - Computer Literate.

Working for a busy soft drinks manufacturer in a highly aggressive and competitive market.

The tasks given in the job description are intended only as a guide to the main tasks associated with the job and in no way intended to restrict any individual in the performance of other duties as required by the Company.

As is legally expected by the Health and Safety Authority Act XXVII of 2000, the employee shall be expected to cooperate with the employer in all Health and Safety issues so as to safeguard his own health and safety and that of other persons who can be affected by his course of work. Failure to do so will result in disciplinary actions against the employee.

Active

VNA Driver 

To provide a very good service to our clients and ensure that all products are delivered in accordance with our quality standards.


To provide a very good service to our clients and ensure that all products are delivered in accordance with our quality standards.

Responsibilities


 - To effect deliveries in accordance with the day-to-day schedule stipulated by the Company or its representatives. 

 - To abide by the delivery instructions on the delivery sheet.

 - To check the safety of the load before leaving the Plant.

 - To maintain company equipment in good order and condition.

 - To ensure the truck is kept clean inside and out.

 - To report vehicle faults and damages immediately to the driver.

 - To know the correct procedures to carry out in the event of a vehicle accident and carry them out when the need arises.

 - To ensure that all invoices are signed by driver and also by the client. Also you need to check that the client wrote the name in full and filled out his ID card no.

 - To pack stock in the customers store room, as required.

 - To ensure that the stock at the outlet is always rotated i.e. using the F.E.F.O (first expiry first out) procedure.

 - To learn how to check and handle money.

 - To ensure that you are aware and use the correct company and documentation procedures for every type of delivery, including ensuring that all cheques are filled out correctly.

 - To complete all documentation legibly. 

 - To collect all product returns and expired that are to be returned back to the company as per invoice.

 - To collect all monies invoiced on a cash basis from customers. Complete settlement sheet on a daily basis and settle with the cashier on return to the Plant.

 - To ensure that personal appearance is presentable and clean i.e. no piercing, clean uniform, well-groomed etc.

 - To abide by the rules of the Company as far as personal behaviour.	In particular, NO DRINKING of alcoholic beverages during working hours.

 - To conduct all business transactions and behave in a manner that promotes the Company image and maintains customer satisfaction and goodwill.

 - To carry out other reasonable duties that are asked other those listed in this job description.


Qualifications


 - Able to read, write &amp; communicate in Maltese &amp; English

 - Basic Mathematical skills.

 - Well organised.

Working for a busy soft drinks manufacturer in a highly aggressive and competitive market.

The tasks given in the job description are intended only as a guide to the main tasks associated with the job and in no way intended to restrict any individual in the performance of other duties as required by the Company.

As is legally expected by the Health and Safety Authority Act XXVII of 2000, the employee shall be expected to cooperate with the employer in all Health and Safety issues so as to safeguard his own health and safety and that of other persons who can be affected by his course of work. Failure to do so will result in disciplinary actions against the employee.